Juniper JUNOSe 10.3.1 Скачать руководство пользователя | Manualshive

Страница: 48 / 122

background image

JUNOSe 10.3.1 Release Notes

40

Known Problems and Limitations

When more than about 100,000 mapped OIF entries are configured on a
virtual router, issuing the

no virtual router

command for this and other virtual

routers does not delete all the virtual routers within the deletion timeout
interval (3 minutes). The virtual routers do eventually delete after this timeout.
[Defect ID 63882]

The E Series router does not log a warning when it receives an IGMPv2 query
but is not configured to use IGMPv2 on the interface. [Defect ID 46046]

IP

The ES2 4G LM can reset during a unified ISSU after you issue the

issu start

command on a router configured with 8000 dynamic VCs and 8000
packet-triggered dynamic subscriber interfaces. [Defect ID 86761]

If you have a large configuration on a hybrid module combination (OC3/STM-1
GE/FE line module with the OC3-2 GE APS I/O module), boot from NVS, and
issue the

slot erase

command before booting has completed, the line module

resets. [Defect ID 64104]

Work-around:

To recover from the error, issue the

slot reload

command

anytime after the module begins to reset.

Deleting a VRF with 32,000 static subscriber interfaces fails to complete.
[Defect ID 82670]

Work-around:

Use a macro to delete all static subscriber interfaces before you

delete a VRF.

IP interface statistics become inconsistent when a slot is reset, because some
traffic (such as control traffic) might be destined for the SRP module and is
therefore counted elsewhere. [Defect ID 26697]

The

ip route permanent

command does not work properly. [Defect ID 34303]

Work-around:

Issue the

ip alwaysup

command to prevent the route from

being removed from the IP routing table after the interface is shut down.

Traffic statistics for dynamic subscriber interfaces associated with Mobile IP
subscribers are not maintained as the subscribers move between Mobile IP
nodes. Consequently the reported interface statistics are only the values
accumulated since the last time a mobile node moved. [Defect ID 174509]

When a router configured with PIM on a virtual router undergoes multiple
warm restarts, the router subsequently hangs when an IP profile is configured.
[Defect ID 176470]

Logical port 20 on the ES2-S3 GE-20 IOA is reserved for the hardware multicast
packet replication feature. Logical port 20 and the hardware multicast
replication feature are not supported on the ES2-S3 GE-20 IOA in this release.
[Defect ID 84727]

«
...
46
47
48
49
50
...
»

Содержание JUNOSe 10.3.1



























































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSe 10.3.1

Codian Remote Management API

Бренд: TANDBERG Страницы: 66

MaxACD Administrator

Бренд: Altigen Страницы: 261

FLASH 8-USING FLASH VIDEO ENCODER

Бренд: MACROMEDIA Страницы: 30

Persona Persona M30e

Бренд: Fargo Страницы: 31

SMROUTERUPDATINGFIRMWARE

Бренд: Belkin Страницы: 4

Бренд: Toshiba Страницы: 1

dynadock Drivers

Бренд: Toshiba Страницы: 3

e-STUDIO Printer/Fax/Scanner/Copier

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 53

Бренд: Sony Страницы: 1

Walkman D-NE319

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

VAIO VGN-TXN17P/T

Бренд: Sony Страницы: 2

VAIO VGN-TXN19P

Бренд: Sony Страницы: 2

VAIO VGN-TXN17P/B

Бренд: Sony Страницы: 2

VAIO VGN-TXN15P/W

Бренд: Sony Страницы: 2

VAIO VGN-TXN15P/T

Бренд: Sony Страницы: 2

VAIO VGN-TXN15P/B

Бренд: Sony Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды