Juniper JUNOSe 10.3.1 Скачать руководство пользователя | Manualshive

Страница: 120 / 122

background image

JUNOSe 10.3.1 Release Notes

112

Monitoring the Status of Transfer of Updated DSL Line Rate Parameters to the COPS Server

Monitoring the Status of Transfer of Updated DSL Line Rate Parameters to the
COPS Server

Purpose

Display whether the SRC client is enabled to retrieve updated DSL line rate details
from ANCP and send them to the SRC client with corresponding COPS messages.
The command output refers to the SRC client by its former name, SSC client.

Action

To display the status of transfer of updated line rate parameter details from the SRC
client to the COPS server.

The line highlighted in bold is the field added for this feature in the output of this
command. The added line specifies whether line rate parameters are sent to the
COPS server with the other COPS messages.

host1#

show sscc info

The SSC Client configured protocols : IP(v4), DHCP(v4), L2TP(LAC)
The SSC Client is currently unconnected
The SSC Client configured servers are:
        Primary: 10.10.2.2:3
        Secondary: 0.0.0.0:0
        Tertiary: 0.0.0.0:0
        Local Source: FastEthernet 0/0, Local Source Address: 10.13.5.61
        The configured transport router is: default
        The configured retry timer is (seconds): 90

The configured update-policy-request is: Enabled

        The connection state is: NoConnection
SSC Client Statistics:
        Policy Commands received   0
        Policy Commands(List)      0
        Policy Commands(Acct)      0
        Bad Policy Cmds received   0
        Error Policy Cmds received 0
        Policy Reports sent        0
        Connection Open requests   0
        Connection Open completed 0
        Connection Closed sent     0
        Connection Closed remotely 0
        Create Interfaces sent     0
        Delete Interfaces sent     0
        Active IP Interfaces       2
        IP Interface Transitions   0
        Synchronizes received      0
        Synchronize Complete sent  0
        Internal Errors            0
        Communication Errors       0
        Tokens Seen               0
        Active Tokens              0
        Token Transitions          0
        Token Creates Sent         0
        Token Deletes Sent         0
        Active Addresses          0
        Address Transitions        0
        Create Addresses Sent      0
        Delete Addresses Sent      0
        Authentication Successes   0
        Authentication Failures   0

«
...
118
119
120
121
122
»

Содержание JUNOSe 10.3.1



























































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSe 10.3.1

eTrex H - Hiking GPS Receiver

Бренд: Garmin Страницы: 100

Бренд: Yamaha Страницы: 43

Бренд: Adobe Страницы: 822

Codian Remote Management API

Бренд: TANDBERG Страницы: 66

PRIVILEGED USER MANAGER 2.2

Бренд: Novell Страницы: 37

NECSAM RICHER APPT FINAL2

Бренд: NEC Страницы: 1

NECAM NEWSREL 070306

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 3

Бренд: NEC Страницы: 9

Бренд: NEC Страницы: 49

Бренд: NEC Страницы: 56

NEC Storage PathManager 3.1

Бренд: NEC Страницы: 65

MultiSync FP1375X

Бренд: NEC Страницы: 64

MultiSync FP955

Бренд: NEC Страницы: 68

FreeAgent Desk 2TB

Бренд: Seagate Страницы: 2

Doctor Pro TM-2430-13

Бренд: A&D Страницы: 69

AURORA BROWSE 7

Бренд: GRASS VALLEY Страницы: 4

FS-8704-14 EtherNet

Бренд: FieldServer Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды