Known Behavior
29
Release 10.3.1
This is a change in default behavior. For releases before Release 7.2.0, you
could not configure scheduler nodes as active constituents of the simple shared
shaper, except for the best-effort node.
To recover the default behavior available before Release 7.2.0, or to select
active constituents that are different, use simple explicit shared shapers to
select best-effort nodes only.
When you are configuring compound shared shaping using explicit
constituents and you explicitly specify both a scheduler node and a queue
stacked above the node as constituents of the shared shaper, the system selects
the scheduler node (but not the queue) as the constituent.
RADIUS
JUNOSe Software provides extended commands for configuring the formats of
the RADIUS NAS-Port attribute (attribute 5) and the RADIUS Calling-Station-ID
attribute (attribute 31) when the physical port value is greater than 7.
When the physical port value is greater than 7:
An incorrectly configured NAS-Port attribute format results if you use either
the
radius nas-port-format 0ssssppp
or
radius nas-port-format ssss0ppp
command.
An incorrectly configured Calling-Station-ID attribute results if you use
either the
radius calling-station-format fixed-format
command or the
radius calling-station-format fixed-format-adapter-embedded
command.
Work-around
: Use the following commands on routers that have line modules
with more than 7 physical ports:
To configure the NAS-Port attribute format, use the
radius nas-port-format
extended [ atm | ethernet ]
command.
To configure the Calling-Station-ID attribute format, use the
radius
calling-station-format fixed-format-adapter-new-field
command.
SNMP
SNMP MIBs
Information about all the SNMP MIBs (both standard and proprietary) that the
router supports in this release is available in the MIB directory in the
SW_Image_CD-2 folder of the JUNOSe Software image bundle, which you
downloaded from the Juniper Networks website, that contains the release file
for E120 and E320 routers. .
