Juniper JUNOS OS 10.3 - SOFTWARE, Руководство пользователя

Страница: 1795 / 3946

[edit interfaces interface-name unit logical-unit-number family inet6
address address vrrp-inet6-group group-id ]
user@switch#
set inet6-advertise-interval milliseconds
4.
By default, a higher-priority backup router preempts a lower-priority master router.
•
To explicitly enable the master router to be preempted:
[edit interfaces interface-name unit logical-unit-number family inet6
address address vrrp-inet6-group group-id ]
user@switch#
set preempt
• To prohibit a higher-priority backup router from preempting a lower priority master
router:
[edit interfaces interface-name unit logical-unit-number family inet6
address address vrrp-inet6-group group-id ]
user@switch#
set no-preempt
Related
Documentation
•
show vrrp on page 2303
•
Understanding VRRP on EX Series Switches on page 1671
Using IPsec to Secure OSPFv3 Networks (CLI Procedure)
OSPF version 3 (OSPFv3) does not have a built-in authentication method and relies on
IP Security (IPsec) to provide this functionality. You can use IPsec to secure OSPFv3
interfaces on EX Series switches.
This topic includes:
•
Configuring Security Associations on page 1699
• Securing OPSFv3 Networks on page 1700
Configuring Security Associations
When you configure a security association (SA), include your choices for authentication,
encryption, direction, mode, protocol, and security parameter index (SPI).
To configure a security association:
1.
Specify a name for the security association:
[edit security ipsec]
user@switch#
set security-association sa-name
2.
Specify the mode of the security association:
[edit security ipsec security-association sa-name ]
user@switch# set mode transport
3.
Specify the type of security association:
[edit security ipsec security-association sa-name ]
user@switch# set type manual
4.
Specify the direction of the security association:
1699 Copyright © 2010, Juniper Networks, Inc.
Chapter 71: Configuring Layer 3 Protocols