Juniper JUNOS OS 10.3 - SOFTWARE, Руководство пользователя

Страница: 1219 / 3946

By default, the actor and partner send LACP packets every second. You can configure
the interval at which the interfaces send LACP packets by including the periodic statement
at the
[edit interfaces interface-name aggregated-ether-options lacp] hierarchy level.
The interval can be fast (every second) or slow (every 30 seconds).
Configuring LACP for the LAGs on the Virtual Chassis Access Switch
To configure LACP for the access switch LAGs, perform these tasks:
CLI Quick
Configuration
To quickly configure LACP for the access switch LAGs, copy the following commands
and paste them into the switch terminal window:
[edit]
set interfaces ae0 aggregated-ether-options lacp active periodic fast
set interfaces ae1 aggregated-ether-options lacp active periodic fast
Step-by-Step
Procedure
To configure LACP for Host-A LAGs
ae0
and
ae1
:
1.
Specify the aggregated Ethernet options for both bundles:
[edit interfaces]
user@Host-A#
set ae0 aggregated-ether-options lacp active periodic fast
user@Host-A#
set ae1 aggregated-ether-options lacp active periodic fast
Results Display the results of the configuration:
[edit interfaces]
user@Host-A# show
ae0 {
aggregated-ether-options {
lacp {
active;
periodic fast;
}
}
}
ae1 {
aggregated-ether-options {
lacp {
active;
periodic fast;
}
}
}
Configuring LACP for the LAGs on the Virtual Chassis Distribution Switch
To configure LACP for the two uplink LAGs from the Virtual Chassis access switch to the
Virtual Chassis distribution switch, perform these tasks:
CLI Quick
Configuration
To quickly configure LACP for the distribution switch LAGs, copy the following commands
and paste them into the switch terminal window:
[edit interfaces]
set ae0 aggregated-ether-options lacp passive periodic fast
set ae1 aggregated-ether-options lacp passive periodic fast
1123 Copyright © 2010, Juniper Networks, Inc.
Chapter 51: Examples: Interfaces Configuration