Juniper JUNOS OS 10.3 - SOFTWARE, Руководство пользователя

Страница: 2603 / 3946

Table 329: show pim rps Output Fields (continued)
Level of Output Field Description Field Name
extensive Current register state for each group:
•
Group
—Multicast group address.
•
Source
—Multicast source address for which the PIM register is sent or received,
depending on whether this router is a designated router facing an RP router,
or is the local RP, respectively:
• First Hop —PIM-designated routing device that sent the Register message
(the source address in the IP header).
•
RP Address —RP to which the Register message was sent (the destination
address in the IP header).
•
State
:
On the designated router:
•
Send —Sending Register messages.
•
Probe
—Sent a null register. If a Register-Stop message does not arrive in
5 seconds, the designated router resumes sending Register messages.
•
Suppress
—Received a Register-Stop message. The designated router is
waiting for the timer to resume before changing to Probe state.
• On the RP:
•
Receive
—Receiving Register messages.
Register State for
RP
extensive
If anycast RP is configured, the addresses of the RPs in the set.
Anycast-PIM rpset
extensive If anycast RP is configured, the local address used by the RP. Anycast-PIM local
address used
extensive
If anycast RP is configured, the current register state for each group:
• Group —Multicast group address.
• Source —Multicast source address for which the PIM register is sent or received,
depending on whether this routing device is a designated router facing an RP
router, or is the local RP, respectively.
•
Origin
—How the information was obtained:
•
DIRECT
—From a local attachment
•
MSDP —From the Multicast Source Discovery Protocol (MSDP)
•
DR
—From the designated router
Anycast-PIM
Register State
show pim rps
user@host>
show pim rps
Instance: PIM.master
Address family INET
show pim rps
RP address Type Holdtime Timeout Groups Group prefixes
10.255.14.144 static 0 None 1 224.0.0.0/4
Address family INET6
show pim rps brief The output for the show pim rps brief command is identical to that for the show pim rps
command. For sample output, see show pim rps on page 2507.
show pim rps instance
user@host>
show pim rps instance VPN-A
2507 Copyright © 2010, Juniper Networks, Inc.
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast