Juniper EX2200 Series Скачать руководство пользователя страница 143

Страница: 143 / 214

To remove an SFP, SFP+, XFP, or a QSFP+ transceiver:

By using your fingers, pull open the ejector lever on the transceiver to unlock the
transceiver.

CAUTION:

Before removing the transceiver, make sure that you open

the ejector lever completely until you hear it click. This prevents damage
to the transceiver.

Grasp the transceiver ejector lever and gently slide the transceiver approximately
0.5 in. (1.3 cm) straight out of the port.

CAUTION:

To prevent electrostatic discharge (ESD) damage to the

transceiver, do not touch the connector pins at the end of the
transceiver.

Figure 58: Removing an SFP, SFP+, XFP, or a QSFP+ Transceiver

1— Ejector lever

To remove a CFP transceiver:

Loosen the screws on the transceiver by using your fingers.

Grasp the screws on the transceiver and gently slide the transceiver approximately
0.5 in. (1.3 cm) straight out of the port.

CAUTION:

To prevent electrostatic discharge (ESD) damage to the

transceiver, do not touch the connector pins at the end of the
transceiver.

By using your fingers, grasp the body of the transceiver and pull it straight out of the
port.

143

Chapter 4: Maintaining Components

Содержание EX2200 Series













































































































































































































Результаты поиска

Содержание EX2200 Series

Отзывы:

Бренды по названию

Популярные бренды

Juniper EX2200 Series, Руководство по оборудованию

Результаты поиска

Содержание EX2200 Series

Отзывы:

Бренды по названию

Популярные бренды