9
v1.9
31.08.2021
3.5
Overview of interfaces
No.
Description
1
Grounding (PE) - 2x1,5mm² flat plug contacts
2
Power supply (0V DC - ignition contact - +12 V or +24/48 V DC)
3
Switch for auto start function (OFF:ON)
4
COM2 (RS232)
5
Switch for 5V at Pin9 COM1 (OFF:ON)
6
COM1 (RS232) with optional 5V power supply on pin 9
7
R-SMA connector for external 2.4/5 GHz WLAN antenna (optional)
8
2 x Ethernet 10/100/1000 Mbit RJ45
9
3 x type A USB 2.0
10
Use grommets to ensure IP65 protection. The grommets have a slot on the side for inserting the cables.
For strain relief, an additional cable tie can be attached over the corresponding opening on the outside.
