22
v1.9
31.08.2021
Ignition Contact
The truck terminal has the option of being started or locked by means of an additional signal input. This
function is used to protect the system against unauthorized access and saves energy when used in
battery-powered vehicles or mobile locations.
Applying a voltage to the ignition contact in the switched-off state automatically switches on the vehicle
terminal.
Activate Ignition Key functionality
Enables Ignition Key feature. If
no
ignition voltage is supplied to the WMT, the device will carry on with
the configured action under
“Action:” i.e. Block screen
Note
If there is no ignition voltage on the WMT, the WMT can be rendered unusable by activating the
Ignition function, since the WMT is immediately blocked or shut down depending on the configu-
ration.
Invert activation logic
Changes logic for the execution of the Ignition Key function. Performs the function
selected under
“Action” only if the ignition voltage is applied to the WMT
Ignore initial ignition signal state (edge triggering)
If a (low) voltage is already present on the ignition pin when the forklift is still
switched off, the WMT ignores it if the option is activated accordingly. Only a voltage
edge will trigger a state change (start or stop).
