31
v1.9
31.08.2021
checkbox to
“Do not want to copy an image file to the flash drive”. To reset the WMT to factory settings,
download the latest image from
http://www.support-rdt.jungheinrich.com
Continue with
“Next” and check the settings before you finish the process with “Finish”. The USB stick
is then formatted and prepared for installation
Note
All data on the USB stick will be deleted after confirming the
“Finish” button and cannot be restored.
Boot from Install USB stick
Before switching on the WMT, connect the installation USB stick to one of the USB ports. Switch on the
WMT and start the one-time boot menu with the
“ESC” button (see chapter 6. BIOS) and select the
USB stick. The admin password is required, so a USB-Keyboard is required.
Note
