Jungheinrich EZS 350 XL Скачать руководство пользователя

Страница: 56 / 125

4.4.2 Rockinger coupling with hand lever or remote control (

)

CAUTION!

Incorrectly coupled trailers can cause accidents



Make sure the coupling is engaged securely before starting the truck.



The contro pin (52) must be flush with the control sleeve (51).

Hitching the trailer

Procedure

• Prevent the trailer from rolling away.
• Push the tow eye of the trailer into the

trailer coupling.

• Pull the hand lever (51) / remote control

(50) (

) up.

The bolt of the trailer coupling closes
automatically.

• Slowly reverse the truck until the

coupling engages.

• Push the hand lever (51) / remote control

(50) (

) down.

The trailer is now coupled.

Unhitching the trailer

Procedure

• Prevent the trailer from rolling away.
• Pull the hand lever (51) / remote control (50) (

) up.

• Drive the truck forward.
• Push the hand lever (51) / remote control (50) (

) down.

The trailer is now de-coupled.

4.4.2 Rockinger coupling with hand lever or remote control (

)

CAUTION!

Incorrectly coupled trailers can cause accidents



Make sure the coupling is engaged securely before starting the truck.



The contro pin (52) must be flush with the control sleeve (51).

Hitching the trailer

Procedure

• Prevent the trailer from rolling away.
• Push the tow eye of the trailer into the

trailer coupling.

• Pull the hand lever (51) / remote control

(50) (

) up.

The bolt of the trailer coupling closes
automatically.

• Slowly reverse the truck until the

coupling engages.

• Push the hand lever (51) / remote control

(50) (

) down.

The trailer is now coupled.

Unhitching the trailer

Procedure

• Prevent the trailer from rolling away.
• Pull the hand lever (51) / remote control (50) (

) up.

• Drive the truck forward.
• Push the hand lever (51) / remote control (50) (

) down.

The trailer is now de-coupled.

Содержание EZS 350 XL






























































































































Результаты поиска

Содержание EZS 350 XL

Отзывы:

Похожие инструкции для EZS 350 XL

Бренды по названию

Популярные бренды

Jungheinrich EZS 350 XL, Руководство по эксплуатации

Результаты поиска

Содержание EZS 350 XL

Отзывы:

Похожие инструкции для EZS 350 XL

Бренды по названию

Популярные бренды