Jungheinrich EZS 350 XL, Руководство по эксплуатации

Страница: 66 / 125

65
11
.1
4
E
N
Assigning the starting travel program (depending on the truck)
The travel programs are connected to the code. The travel programs can be
individually released or blocked for each code. A starting travel program can be
assigned to each code.
Once a user code has been set up, all travel programs are globally released, the valid
start travel program is travel program 2.
The code configuration can then be changed with program number 024.
1. digit: travel program 1 release (0 = blocked or 1 = released)
2nd digit: travel program 2 release (0 = blocked or 1 = released)
3rd digit: travel program 3 release (0 = blocked or 1 = released)
4th digit: start travel program (0, 1, 2 or 3)
003 Delete code 0000 - 9999
or
00000 - 99999
or
000000 - 999999
– (LED 61 flashes)
Confirm new code
entry
–
(Set 64)
– (LED 62 flashes)
repeat code entry
–
(Set 64)
004 Delete code log (deletes
all codes) 3265 – 3265 = delete
– other inputs = do
not delete
010 Automatic timeout 00-31 00 – 00 = No timeout
– 01 - 30 = Timeout
in minutes
– 31 = Timeout after
10 seconds
No. Function Setting range Standard
setting Procedure
LEDs 60-62 are located in keypads 1-3.
No. Function Setting range Standard
setting Procedure
024 Code configuration 1112
65
11
.1
4
E
N
Assigning the starting travel program (depending on the truck)
The travel programs are connected to the code. The travel programs can be
individually released or blocked for each code. A starting travel program can be
assigned to each code.
Once a user code has been set up, all travel programs are globally released, the valid
start travel program is travel program 2.
The code configuration can then be changed with program number 024.
1. digit: travel program 1 release (0 = blocked or 1 = released)
2nd digit: travel program 2 release (0 = blocked or 1 = released)
3rd digit: travel program 3 release (0 = blocked or 1 = released)
4th digit: start travel program (0, 1, 2 or 3)
003 Delete code 0000 - 9999
or
00000 - 99999
or
000000 - 999999
– (LED 61 flashes)
Confirm new code
entry
–
(Set 64)
– (LED 62 flashes)
repeat code entry
–
(Set 64)
004 Delete code log (deletes
all codes) 3265 – 3265 = delete
– other inputs = do
not delete
010 Automatic timeout 00-31 00 – 00 = No timeout
– 01 - 30 = Timeout
in minutes
– 31 = Timeout after
10 seconds
No. Function Setting range Standard
setting Procedure
LEDs 60-62 are located in keypads 1-3.
No. Function Setting range Standard
setting Procedure
024 Code configuration 1112