Jungheinrich EKS 308, Руководство по эксплуатации

Страница: 61 / 99

0306
.GB
E 24
4.6.3 Depositing a load
– Drive the truck carefully up to the storage location
M
Before a load can be deposited, the driver must ensure that the storage location is
suitable for storing the load (size and capacity).
– Apply the foot switch (45).
– Raise the load handler so that the load
can be taken to the storage location
without striking any objects.
– Carefully push the load into its storage
location.
– Open the pallet clamp by pressing the
“Pallet Clamp” switch (9) (option).
– Check on the display (7) in the control
panel that the pallet clamp is open
(option).
– Carefully lower the load handler so
that the forks are clear of the load.
M
Avoid placing the load down suddenly to
avoid damaging the load and the load
handler.
– Carefully remove the load handler
from the load.
– Fully lower the load handler.
4.7 Parking the truck securely
When you leave the truck it must be securely parked even if you only intend to leave
it for a short time.
F
Do not park the truck on an incline. In special cases the truck may need to be secured
with wedges.
Z
Select a parking place where nobody will collide with the forks.
– Always park the truck with the mast completely lowered.
– Lower the forks to the ground.
– Set the key switch to “0” and remove the key.
9 7
0306
.GB
E 24
4.6.3 Depositing a load
– Drive the truck carefully up to the storage location
M
Before a load can be deposited, the driver must ensure that the storage location is
suitable for storing the load (size and capacity).
– Apply the foot switch (45).
– Raise the load handler so that the load
can be taken to the storage location
without striking any objects.
– Carefully push the load into its storage
location.
– Open the pallet clamp by pressing the
“Pallet Clamp” switch (9) (option).
– Check on the display (7) in the control
panel that the pallet clamp is open
(option).
– Carefully lower the load handler so
that the forks are clear of the load.
M
Avoid placing the load down suddenly to
avoid damaging the load and the load
handler.
– Carefully remove the load handler
from the load.
– Fully lower the load handler.
4.7 Parking the truck securely
When you leave the truck it must be securely parked even if you only intend to leave
it for a short time.
F
Do not park the truck on an incline. In special cases the truck may need to be secured
with wedges.
Z
Select a parking place where nobody will collide with the forks.
– Always park the truck with the mast completely lowered.
– Lower the forks to the ground.
– Set the key switch to “0” and remove the key.
9 7