Jungheinrich EKS 308, Руководство по эксплуатации

Страница: 55 / 99

0306
.GB
E 18
4.3.1 Rail guidance truck
Rail guidance trucks are equipped with sensors which activate aisle sensing when
they enter narrow aisles.
– Approach the aisle at reduced speed so that the truck is aligned with the narrow
aisle and is within the demarcation.
Z
Observe the notices attached along the route.
Z
Travel and hydraulic operations can only be activated in the narrow aisle with two-
handed operation.
– Slowly enter the narrow aisle.
Ensure that the truck guide rollers enter the narrow aisle guidance rails.
– Press the “guidance on” (37) switch.
– The “guidance on” display light (46) changes to
active mode.
– The drive wheel is automatically set forward. The
steering angle display (14) shows the steering
angle permanently in the centre position after
alignment. Manual steering is disabled.
– Grab the handle (11) with the hand rest and
with the other hand operate the travel
control knob (1) and/or the hydraulic control
knob (2) (two-hand operation).
– The travel control knob (1) affects travel
speed and direction.
– Continue to travel along the narrow aisle at
your required speed.
M
Press the push button (37) to leave the rail guidance.
The display (46) changes to non-active mode. The
truck is now also free to move.
F
You can only change from automatic to manual
steering once the truck has completely left the narrow
aisle.
37
14 46
1
11
2
14
37
46
0306
.GB
E 18
4.3.1 Rail guidance truck
Rail guidance trucks are equipped with sensors which activate aisle sensing when
they enter narrow aisles.
– Approach the aisle at reduced speed so that the truck is aligned with the narrow
aisle and is within the demarcation.
Z
Observe the notices attached along the route.
Z
Travel and hydraulic operations can only be activated in the narrow aisle with two-
handed operation.
– Slowly enter the narrow aisle.
Ensure that the truck guide rollers enter the narrow aisle guidance rails.
– Press the “guidance on” (37) switch.
– The “guidance on” display light (46) changes to
active mode.
– The drive wheel is automatically set forward. The
steering angle display (14) shows the steering
angle permanently in the centre position after
alignment. Manual steering is disabled.
– Grab the handle (11) with the hand rest and
with the other hand operate the travel
control knob (1) and/or the hydraulic control
knob (2) (two-hand operation).
– The travel control knob (1) affects travel
speed and direction.
– Continue to travel along the narrow aisle at
your required speed.
M
Press the push button (37) to leave the rail guidance.
The display (46) changes to non-active mode. The
truck is now also free to move.
F
You can only change from automatic to manual
steering once the truck has completely left the narrow
aisle.
37
14 46
1
11
2
14
37
46