manualshive.com logo in svg

Jungheinrich EKS 308, Руководство по эксплуатации

Поделиться
Скачать
Jungheinrich EKS 308 Скачать руководство пользователя страница 34

D 3

0306

.GB

3

Charging the Battery

F

Park the truck securely  
(see “Parking the Truck Securely” in Chapter E).

– Turn key switch (1) to "0" (zero).
– Lift up the battery panels (3) (see arrow direction).

F

Only connect and disconnect the battery connector and the socket when the mains
and charger are switched off.

– Pull out the battery connector (2).
– If necessary, remove the insulating mat from the battery.

F

When charging, the tops of the battery cells must be exposed to provide sufficient
ventilation. Do not place any metal objects on the battery. Before charging, check all
cables and plug connections for visible signs of damage.

Z

The charger must be adapted to the battery in terms of voltage and charge capacity.

– Connect the charger lead of the battery charger station with the battery connector.
– Switch on the charger.
– Charge the battery in accordance with the battery and charging station

manufacturers’ instructions.

F

It is essential to follow the safety regulations of the battery and charger station
manufacturers.

1

2

3

D 3

0306

.GB

3

Charging the Battery

F

Park the truck securely  
(see “Parking the Truck Securely” in Chapter E).

– Turn key switch (1) to "0" (zero).
– Lift up the battery panels (3) (see arrow direction).

F

Only connect and disconnect the battery connector and the socket when the mains
and charger are switched off.

– Pull out the battery connector (2).
– If necessary, remove the insulating mat from the battery.

F

When charging, the tops of the battery cells must be exposed to provide sufficient
ventilation. Do not place any metal objects on the battery. Before charging, check all
cables and plug connections for visible signs of damage.

Z

The charger must be adapted to the battery in terms of voltage and charge capacity.

– Connect the charger lead of the battery charger station with the battery connector.
– Switch on the charger.
– Charge the battery in accordance with the battery and charging station

manufacturers’ instructions.

F

It is essential to follow the safety regulations of the battery and charger station
manufacturers.

1

2

3

Содержание EKS 308




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды