Jungheinrich EKS 308, Руководство по эксплуатации

Страница: 29 / 99

0306
.GB
C 6
Safely transporting the truck with the mast folded
M
If the truck’s battery is supplied in the chassis, disconnect the battery.
Z
Only use fastening / quick release belts with a rated capacity of >5 tonnes.
The fastening/quick release belts (24) should be attached to at least 4 different lorry
/ truck eyes.
F
Warning! Risk of tipover through high centre of gravity.
The fastening/quick release belts are tensioned over the battery compartment. To do
this, remove the side parts and pack them separately.
Z
Using wooden beams (25), make sure the system is a positive fit from the load wheels
to the front of the transporter.
Z
Place the entire surface area of a wooden beam (26) underneath the counterweight,
the chassis width as minimum, to discharge the drive wheel.
4 Using the truck for the first time
4.1 Moving the truck without a battery
M
This work must only be performed by suitably trained maintenance personnel.
This operating mode is forbidden on slopes and inclines (no brakes).
See also chapter E, “Recovering the truck from a narrow aisle / Moving the truck
without a battery”.
4.2 Installing/removing or erecting/folding the mast
M
This operation must only be performed by the manufacturer or a customer service
team authorised by the manufacturer.
26 25
24
24
0306
.GB
C 6
Safely transporting the truck with the mast folded
M
If the truck’s battery is supplied in the chassis, disconnect the battery.
Z
Only use fastening / quick release belts with a rated capacity of >5 tonnes.
The fastening/quick release belts (24) should be attached to at least 4 different lorry
/ truck eyes.
F
Warning! Risk of tipover through high centre of gravity.
The fastening/quick release belts are tensioned over the battery compartment. To do
this, remove the side parts and pack them separately.
Z
Using wooden beams (25), make sure the system is a positive fit from the load wheels
to the front of the transporter.
Z
Place the entire surface area of a wooden beam (26) underneath the counterweight,
the chassis width as minimum, to discharge the drive wheel.
4 Using the truck for the first time
4.1 Moving the truck without a battery
M
This work must only be performed by suitably trained maintenance personnel.
This operating mode is forbidden on slopes and inclines (no brakes).
See also chapter E, “Recovering the truck from a narrow aisle / Moving the truck
without a battery”.
4.2 Installing/removing or erecting/folding the mast
M
This operation must only be performed by the manufacturer or a customer service
team authorised by the manufacturer.
26 25
24
24