Jungheinrich EJC B14 Скачать руководство пользователя страница 79 | Manualshive

Страница: 79 / 107

Jungheinrich EJC B14 Скачать руководство пользователя страница 79

03

.1

1

E

N

78

6

Maintenance and repairs

6.1

Preparing the truck for maintenance and repairs

All necessary safety measures must be taken to avoid accidents when carrying out
maintenance and repairs. The following preparations must be made:

Procedure

• Park the truck on a level surface.
• Fully lower the main and auxiliary lift.
• Park the truck securely, (see "Parking the truck securely" on page 44).
• Disconnect the battery to prevent the truck from being switched on accidentally.
• When working under a raised lift truck, secure it to prevent it from lowering, tipping

or sliding away.

WARNING!

Risk of accidents when working under the load handler, driver's cab and lift
truck

X

When working under a raised load handler, driver's cab or a raised truck, secure
them to prevent the truck from from lowering, tipping or sliding away.

X

When raising the truck, follow the instructions, (see "Transport and
Commissioning" on page 25). When working on the parking brake, prevent the
truck from accidentally rolling away (e.g. with wedges).

03

.1

1

E

N

78

6

Maintenance and repairs

6.1

Preparing the truck for maintenance and repairs

All necessary safety measures must be taken to avoid accidents when carrying out
maintenance and repairs. The following preparations must be made:

Procedure

• Park the truck on a level surface.
• Fully lower the main and auxiliary lift.
• Park the truck securely, (see "Parking the truck securely" on page 44).
• Disconnect the battery to prevent the truck from being switched on accidentally.
• When working under a raised lift truck, secure it to prevent it from lowering, tipping

or sliding away.

WARNING!

Risk of accidents when working under the load handler, driver's cab and lift
truck

X

When working under a raised load handler, driver's cab or a raised truck, secure
them to prevent the truck from from lowering, tipping or sliding away.

X

When raising the truck, follow the instructions, (see "Transport and
Commissioning" on page 25). When working on the parking brake, prevent the
truck from accidentally rolling away (e.g. with wedges).

«
...
77
78
79
80
81
...
»

Содержание EJC B14












































































































Отзывы:

Нет отзывов