manualshive.com logo in svg

Jungheinrich EJC B14, Руководство по эксплуатации, Страница: 56 / 107

Поделиться
Скачать
Jungheinrich EJC B14 Скачать руководство пользователя страница 56

55

03

.1

1

 E

N

6

Operating the truck without its own drive system

WARNING!

Uncontrolled truck movement

When the brakes are de-activated the truck must be parked on a level surface, since
the brakes are no longer effective.

X

Do not release the brake on slopes or inclines.

X

Apply the brake again when you reach your destination.

X

Do not park the truck with the brake released.

Releasing the brake

Requirements

– Park the truck securely, (see "Parking the truck securely" on page 44).

Tools and Material Required

– Two M5x42 screws
– Spanner wrench

Procedure

• Prevent the truck from rolling away.
• Lift up the front cover (17) and put it to one side, (see "Removing the front panel"

on page 79).

• Insert two M5x42 screws (52) as far as the stop and lift up the anchor plate. 

The brake is now released and the truck can be moved.

Applying the brake

Procedure

• Unscrew the two M5x42 screws again.
• Refit the front cover (17).

Braking is now restored again.

52

55

03

.1

1

 E

N

6

Operating the truck without its own drive system

WARNING!

Uncontrolled truck movement

When the brakes are de-activated the truck must be parked on a level surface, since
the brakes are no longer effective.

X

Do not release the brake on slopes or inclines.

X

Apply the brake again when you reach your destination.

X

Do not park the truck with the brake released.

Releasing the brake

Requirements

– Park the truck securely, (see "Parking the truck securely" on page 44).

Tools and Material Required

– Two M5x42 screws
– Spanner wrench

Procedure

• Prevent the truck from rolling away.
• Lift up the front cover (17) and put it to one side, (see "Removing the front panel"

on page 79).

• Insert two M5x42 screws (52) as far as the stop and lift up the anchor plate. 

The brake is now released and the truck can be moved.

Applying the brake

Procedure

• Unscrew the two M5x42 screws again.
• Refit the front cover (17).

Braking is now restored again.

52

Содержание EJC B14












































































































Отзывы:

Нет отзывов