Jungheinrich AMXE 10, Руководство по эксплуатации

Страница: 36 / 45

F 3
0708
.GB
3 Servicing and inspection
Thorough and expert servicing is one of the most important preconditions for safe
operation of the fork lift truck. The neglect of regular servicing intervals can lead to
fork lift truck failure and constitutes a potential hazard to personnel and equipment.
m
The indicated servicing intervals are based on single-shift operation under normal
operating conditions. For applications in dusty environments, or involving large
temperature fluctuations or multiple-shift operation, the servicing intervals must be
shortened accordingly.
The following servicing checklist indicates the operations to be performed and the
respective intervals to be observed. The servicing intervals are defined as follows:
W = every 50 operating hours, but at least once per week
A = every 500 operating hours
B = every 1000 operating hours
C = every 2000 operating hours, or at least annually
A
The W maintenance intervals must be carried out by the operator / customer.
In the run-in period - after approx. 100 service hours - or after repair work, the owner
must check the wheel nuts/bolts and re-tighten if necessary.
F 3
0708
.GB
3 Servicing and inspection
Thorough and expert servicing is one of the most important preconditions for safe
operation of the fork lift truck. The neglect of regular servicing intervals can lead to
fork lift truck failure and constitutes a potential hazard to personnel and equipment.
m
The indicated servicing intervals are based on single-shift operation under normal
operating conditions. For applications in dusty environments, or involving large
temperature fluctuations or multiple-shift operation, the servicing intervals must be
shortened accordingly.
The following servicing checklist indicates the operations to be performed and the
respective intervals to be observed. The servicing intervals are defined as follows:
W = every 50 operating hours, but at least once per week
A = every 500 operating hours
B = every 1000 operating hours
C = every 2000 operating hours, or at least annually
A
The W maintenance intervals must be carried out by the operator / customer.
In the run-in period - after approx. 100 service hours - or after repair work, the owner
must check the wheel nuts/bolts and re-tighten if necessary.