D*AP8
62
setup GUI – AUDIO PROCESSOR –
Fail Over
(4 x 2 program configuration)
For the
4x2 Program Configuration
(SYSTEM > Setup > Program Configuration) the
D*AP8
offers
four
independent
Fail Over
circuits (see Overview sketch).
The source for the Fail Over circuit can be either the adjacent program input (e.g. input 2L/R for the
program input 1L/1R) or the
AUX
input. The
Mode
switch will select the respective signal path.
See the example above for the four program outputs :
program 1 (1L/1R)
has a valid input signal and is prepared for auto switch over
to the second program input
2L/2R.
program 2 (2L/2R)
has no valid input and has automatically switched over
to the
AUX
input.
program 3 (3L/3R)
has a valid input and is prepared for auto switch over
to input
4L/4R,
input
4L/4R
has valid input.
This is indicated by the
yellow
soft LED.
program 4 (4L/4R)
is fix connected to
AUX.
Signal input is mono L.
Fail Over 1L/1R
Example description of the fail over function blocks
MODE
The Fail Over output can be permanently
connected to:
* its program input
1L/1R
*
its adjacent program input
2L/2R
* or to the
AUX
input.
Automatic switch over in case of an input
failure may be configured for the
AUX
or the
adjacent
2L/2R
input.
