27
Explanation of terms and definitions
OS address
Every outdoor station is assigned with an
outdoor station
address.
The address enables the differentiation between the various installed
outdoor station. Selective communication or door release of e.g.
main- or side entrance can be realised.
Ready for operation Incoming door call - You can hear a ring tone and the LED at the
communication button flashes. You can activate a communication
with the outdoor station by means of a short push of the
communication button.
Hands-free operation
(Full duplex)
Simultaneous communication in both directions.
Door call
You release a door call at the assigned indoor station by means of
pushing the bell button. A bell button can release a door call at two
indoor stations (parallel call).
Internal call
An indoor station can call another assigned indoor station for an
internal communication.
Automatic light
switching
Programming at the
outdoor station.
The light will be switched depending on the ambient brightness when
you push the bell button of the outdoor station. The limited brightness
value is adjustable.
Light switching
The function button of the indoor station is assigned with the function
"light switching" (factory setting). A bell button of the outdoor station
will switch the light, if the bell button is not assigned to an indoor
station.
Light switching
function
Programming at the
power supply and control
unit.
The door release button can be assigned with an extra function,
when the light switching function is activated at the power supply and
control unit:
You first have to push the communication button before you can
release the door with the door release button.
Without pushing the communication button you will switch the light
with the door release button.
Parallel call
A second indoor station can be programmed to a bell button of the
outdoor station.
Parallel function
Programming only with the
service device.
Multiple indoor station can respond to one bell button of the outdoor
station or the floor bell button. Each further indoor station respond
just as the first indoor station.
Programming mode
The system has to be in programming mode to assign the indoor
stations to the desired bell buttons of the outdoor station.
Acknowledge tone
Acoustical confirmation
Idle mode
The device is ready for a door call or other operation.
Call diversion
An incoming door call will be forwarded from one indoor station to
another indoor station. The call diversion has to be activated with the
function button. The illuminated LED of the function button indicates
the activated call diversion.
