11
Commissioning
•
Install all of the devices of the system completely.
•
Check the a, b and P wires for short-circuit.
•
Switch on the mains voltage.
The following functions are available without additional programming:
- existing communication from the indoor stations to the outdoor station
- door release function
- light switching
•
Programming of the system see product information of the outdoor station
Device settings
Storing the device settings
The indoor station is equipped with an EEPROM. After mains voltage failure following
remains saved in the EEPROM: Selected ring tone, ring tone volume/mute, activated call
diversion, internal call, automatic door release, control functions and light switching.
Factory settings
Limited communication time
approx. 1 min
Timeout setting mode
approx. 8 s
Indication of green LED after pushing
communication button when communication
is occupied
3 x
Stand-by after internal call
approx. 30 s
Sings and symbols
acknowledge tone
ring tone
slow LED flashing: 0.5 s ON / 0.5 s OFF
fast LED flashing: 0.125 s ON / 0.125 s OFF
LED pulse flashing:
0.5
s ON /
1.5
s OFF
LED ON
short pushing of button
push button until ….
release the button
