13
Call diversion
Preparation
DCM system is in idle mode.
Target indoor station (
IS2
):
Push communication button.
Starting setting mode at indoor station (IS1)
•
Push function button (for approx. 8 s)
until you can hear acknowledge tone.
•
fast LED flashing
•
release the function button
All LED flashing fast
•
push
communication
button
•
acknowledge
tone
End of settings. The device switches into idle mode.
•
All LEDs OFF
Target indoor station (
IS2
):
If green LED is illuminated:
•
Push
communication
button
•
green LED is OFF
After 60s the target indoor station (
IS2
) automatically
switches into idle mode.
Now you can activate/deactivate a
call diversion
to a selected indoor station (
IS2
) by
means of pushing the function button (
IS1
).
