Jung 10711ST Series, Руководство по эксплуатации

Страница: 4 / 12

KNX push-button universal / KNX push-button standard / KNX push-button
extension
4 Energy saving mode
The device optionally switches to the energy saving mode after a preset time or by an external
telegram. In energy saving mode all LED functions are switched off.
The device leaves the energy saving mode – depending on programming – on operation or by
an external telegram.
Button or rocker operations with activated energy saving mode are executed immediately.
5 Operation
The operation of functions or electrical consumers can be set individual for each device:
Operation concept single-area operation dual-area operation
Rocker function - Each rocker can perform an indi-
vidual function.
Button function Two buttons above one another per-
form the same function. Each button can perform an indi-
vidual function.
Universal: For the rocker functions Dimming, Venetian blind and 2-channel operation, full-
surface operation can be programmed, which can trigger another function.
Operating a function or load
–
Switching: Short press on button / rocker.
– Dimming: Long press on the button / rocker.
– Moving Venetian blind: Long press on button / rocker.
– Stopping or adjusting Venetian blind: Short press on button / rocker.
– Setting value: Short press on button / rocker.
– Adjusting value: Long press on button / rocker
– Opening scene: Short press on button / rocker
– Saving scene: Long press on button / rocker
– Operating channel 1: Short press on button / rocker
– Operating channel 2: Long press on button / rocker
– Operating controller extension: Short press on button / rocker
4 / 12
82402103 19.02.2020
J0082402103