15
Slot one of the Black G4 poles through three of
the sleeves on the top of the enclosure netting.
Slot the remaining Black G4 poles through the
three other sleeves on the top of the enclosure
netting.
You will now join the two ends of the Black G4
will
poles together with the fitted pole connectors, this
require two people.
Both people hold two of the poles end sections
and walk towards each other to bend the poles
into a circle.
As soon as the poles are bent enough, insert the
connectors into the socket on the other pole (1
Push the pin inwards
and fully insert the
(2)
connector.
Ensure the pin is protruding through the slot in the
socket.
