JUMO ecoTRANS Lf 03, Руководство по эксплуатации

Страница: 45 / 68

45
- the current value can be accepted immediately by pressing the
key (for less than 1 second).
- When the first calibration point has been accepted, the lower line
will show NEXT.
✱
Press the key.
✱
Temper the medium to be measured to the working temperature.
- The LC display shows the temperature in the upper line, and the
uncompensated conductivity in the line below.
- The conductivity value will be accepted automatically on reaching
the working temperature,
or
✱
the current value can be accepted immediately by pressing the
key (for less than 1 second).
- The temperature coefficient that was calculated is displayed.
✱
Store the value by pressing (for more than 2 seconds) or
P
P
P
P