JUMO 202755, Руководство по эксплуатации

Страница: 66 / 72

66
14 Appendix
14.1 Before configuration
If a number of instrument parameters have to be modified in the instrument,
then it is advisable to note them in the table below, and then modify these
parameters in the sequence given.
The following list shows the maximum number of parameters that
can be altered.
Depending on the configuration, some of the parameters will not
be alterable (editable) for your device.
Parameter Selection / value range
Factory setting New
adjustment
see page
Conductivity input
Range 1
0 — 500 µS/cm
0 — 1000 µS/cm
0 — 2000 µS/cm
0 — 5000 µS/cm
0 — 10 mS/cm
0 — 20 mS/cm
0 — 50 mS/cm
0 — 100 mS/cm
0 — 200 mS/cm
0 — 500 mS/cm
0 — 1000 mS/cm
0 — 2000 mS/cm (uncompensated)
37
Temperature
compensation linear
non-linear
natural water 37
Temperature coefficient 1 0.0 to 5.5%/°C 37
Reference temperature 15.0 to 25.0 to 30°C 37
Relative cell constant 80.0 — 100.0 — 120.0% 37
Mounting factor 80.0 — 100.0 —120.0% 37
Concentration
measurement No function
NaOH
HNO
3
customer-specific
37
Offset -200 to 0 to +200 mS/cm 38
Filter time 00:00:00 — 00:00:25 H:M:S 38
Calibration interval 0 — 999 days 38
Conductivity output
Signal type
0 — 20 mA
4 — 20 mA
20 — 0 mA
20 — 4 mA
0 — 10 V
2 — 10 V
10 — 0 V
10 — 2 V 38
All manuals and user guides at all-guides.com
all-guides.com