Jumil JM 2040 Series, Руководство оператора

Страница: 38 / 51

3
8
Operator’s Manual JM 2040
9.4 - Row Marker
It is IMPORTANT AND NECESSARY the use of Row markers with
the aim of doing a complete use of the land and at the same time the plants
can be distributed equally and so they can make a good use equally of the
soil conditions, nutritious elements, luminosity, etc. In the same way for to
do mechanical works in the farming, there is need to dispose of rows with
spacing absolutely equal otherwise will take the risk of damage the plants
completely. Besides if we are if the marker badly regulated, giving a larger
spacing, we will be placing smaller quantity of plants per area, with the
inherent damage for lack of plants.
The row markers have several work positions as shows a (Fig.015).
In the position “A” (Fig.0.15) the row marker is destined to lower spacing
and the position “B” to higher spacing.
To change the row markers of position “A” to the position “B” it should
loosen the “C” nut that ties the toothed jaw “D”.
The second toothed jaw “E” of the set is destined to vary the work
angle of the marker disc. The open furrow do not should be excessive; the
disc position should be regulated until get a visible line in the soil that it is
being worked.
The length of the support arm of the marker disc can be varied; coming
unfastened the lock “F” being pulled or being pushed the telescopic tube
“G”, if wants to increase or decrease the arm length of the row marker.
Ps: This adjustment is so much valid for row marker of 10” as for the
row marker with 13”flutted disc.
Fig.015
JM
A
B
C
D
E
F
G