Jumil JM 2040 Series, Руководство оператора

Страница: 18 / 51

Operator’s Manual JM 2040
18
8 - PREPARATION FOR USE
The JM 2040 Fertilizer Planter makes possible the no-till planting
and conventional planning.
In this phase you should already have made the planning of the culture
to be planted, and so will have all the necessary elements to regulate the
machine and to get to take advantage of whatever it can offer.
8.1 - Preparation of the seed distribution units.
The seed distribution is made through the horizontal drilled disc
system. As there is a great variation in the size and format of the seed, there
is need to check the disc with advance and to check if it is the most
appropriated to the seed size that will use.
For that, place the disc in a plain surface and with a representative
sample of the seeds; place the seeds in the holes of the disc.
The size adaptation of the holes to the seed size only will occur if fit
the adequate number of the seeds per hole and should have take care if
there is the possibility of the fitting of a superior number of seeds than the
specified or because of the hole be very small it doesn’t allow the fitting of
the majority of the seeds. The valuation must be in a careful way because
the perfect adaptation of the disc to the seed size is a primordial factor for a
good seed distribution that is one of the conditions for a good productivity.
If the disc is not the more adequate because its size, shape and/or
number of holes, consult our technical services.
Jumil possess several discs to use in agreement with the culture
type and/or seed type to be used.
Ps: consult the item optional parts of this manual.