Jumil JM 2040 Series, Руководство оператора

Страница: 7 / 51

7
Operator’s Manual JM 2040
and you realize its front is too light and it can go up, add necessary weights
on its front.
14) When leaving the tractor, put the gear in neutral position, lower
the implements which are raised, put the hydraulic command system in a
neutral position and action on the stop brake.
15) When the tractor is not used for a long period , besides the previous
procedures, stop the tractor motor and use the first gear if you areon a steep
road and rear gear if you are going down the hill.
16) ALWAYS FOLLOW CAREFULLY THE SAFTE STANDARDS
MADE BY THE TRACTOR´S MANUFACTURER.
17) A MAXIMUM CARE WHEN USING SEEDS WITH CHEMICAL
TREATMENT, YOU MAY ASK FOR AN AGRONOMIST ASSISTANCE.
DONOT MANIPULATE CHEMICAL TREATED SEED WITH BARED-HANDS.
17.1) ALWAYS WASH YOUR HANDS AND BODY EXPOSED PARTS
WITH A LOT OF WATER AND SOAP, AT THE END OF EVERY WORK
SHIFT, MAINLY BEFORE EATING, DRINKING OPR SMOKING.
17.2) Do not throw rest of treated seeds and/or pesticide next to
drinkable water well, stream , river and lakes.
17.3) Do not re-use empty container and flasks.
17.4) Always keep the genuine package and always closed and in a
dry, air place and of a difficult access to children, irresponsible people and
animals.
17.5) Avoid contact with the skin.
17.6)Before using pesticides, READ THE LABLE AND FOLLOW
INSTRUCTIONS.
18) when driving the machine on roads, observe the following additional
instructions:
a) if the machine is equipped with row markers, the row marker arms
must be raise and held with their corresponding disc to inside position.
b) The equipments with an inferior or over 3m width can be transported
on roads since they have suitable signs.
c) The equipments which cover the tractor rear signing lights must
have alternative read signal light.
ATTENTION
When receiving your JUMIL equipment, check attentively
its components which are delivered with the equipment and
read carefully the warranty certificate in the first page of
instruction manual.