Jumil JM 2040 Series, Руководство оператора

Страница: 41 / 51

Operator’s Manual JM 2040
41
Fig.018
is being badly conduct – rotation lack of the cultures,
of straw of covering, etc) and the planter has difficult to
penetrate. Its use is very simple, it leaves regulated
from the factory and there is no need of another
adjustment. For to work To work in a perfect way the
cutting disc should cut the straw perfectly otherwise
will lift the straw and it will cause the “stuffing” of the
machine, hindering its operation. If happens the break
of the fusible screw (Fig.018”a”) during the work, use
commercial screw of the same measure.
9.8 - Fertilizer Double Disc Adjustment
As we described the fertilizer is placed at an open furrow by the
double disc. It is coupled to a pantograph (articulated parallelogram) that
allows a perfect accompaniment of all the soil contours, in a way that the
fertilizer is always positioned to the same depth, independently of the soil
profile. Its work depth can be adjusted through the bush that will hinder a
larger or smaller pressure to the spring. In the beginning, should use the
adjustment that leaves from the factory and if it is need can give more
pressure, alleviating the fixer screw of the bush, pressing it about 3cm from
the base (a length of two fingers approximately) and pressing the screw
again.
The double disc set and furrower can be aligned from the seed double
disc being enough for that to alleviate the nuts from the clamps that secure
the set and to move the set for the site pressing the nuts again.
a