Operator responsibility – Safety instructions
6
¾
The personnel operating the units should be regularly instructed about the dangers involved with
their job activities as well as measures to avert these dangers.
¾
Make sure all persons tasked with operating, installing, and maintaining the unit have read and
understand the safety information and operating instructions.
¾
When using hazardous materials or materials that could become hazardous, the circulator may be
operated only by persons who are absolutely familiar with these materials and the circulator. These
persons must be fully aware of possible risks.
If you have any questions concerning the operation of your unit or the information in this manual,
please contact us!
Contact:
Safet y instr uction s for the oper ator:
¾
Avoid strikes to the housing, vibrations, damage to the operating-element panel (keypad, display),
and contamination.
¾
Make sure the product is checked for proper condition regularly (depending on the conditions of
use). Regularly check (at least every 2 years) the proper condition of the mandatory, warning,
prohibition and safety labels.
¾
Make sure that the mains power supply has low impedance to avoid any negative effects on the
instruments being operated on the same mains.
¾
This unit is designed for operation in a controlled electromagnetic environment. This means that
transmitting devices (e.g., cellular phones) should not be used in the immediate vicinity.
¾
Magnetic radiation may affect other devices with components sensitive to magnetic fields (e.g.,
monitors). We recommend maintaining a minimum distance of 1 m.
¾
Permissible ambient temperature: max. 40 °C, min. 5 °C.
¾
Permissible relative humidity: 50% (40 °C).
¾
Do not store the unit in an aggressive atmosphere. Protect the unit from contamination.
¾
Do not expose the unit to sunlight.
Ap pr opriate o perati on
Only qualified personnel is authorized to configure, install, maintain, or repair the circulator.
Persons who operate the circulator must be trained in the particular tasks by qualified personnel. The
summarized user guidance (short manual) and the specification table with information on individual
parameters are sufficient for this.
Use
The bath can be filled with flammable materials. Fire hazard!
There might be chemical dangers depending on the bath medium used.
Observe all warnings for the used materials (bath fluids) and the respective instructions (safety data
sheets).
Insufficient ventilation may result in the formation of explosive mixtures. Only use the unit in well
ventilated areas.
Only use recommended materials (bath fluids). Only use non-acid and non corroding materials.
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
