Safety notes for the user
20
4.3. Safety
instructions
Follow the safety instructions to avoid personal injury and property damage. Also, the
valid safety instructions for workplaces must be followed.
x
Only connect the unit to a power socket with an earthing contact (PE – protective
earth)!
x
The power supply plug serves as a safe disconnecting device from the line and
must always be easily accessible.
x
Place the unit on an even surface on a base made of nonflammable material.
x
Do not stay in the area below the unit.
x
Make sure you read and understand all instructions and safety precautions listed
in this manual before installing or operating your unit.
x
Set the excess temperature safety installation at least 25 °C below the flash point
of the bath fluid.
x
Never operate the unit without bath fluid in the bath.
x
Pay attention to the thermal expansion of bath oil during heating to avoid
overflowing of the fluid.
x
Prevent water from entering the hot bath oil.
x
Do not drain the bath fluid while it is hot!
Check the temperature of the bath fluid prior to draining (e.g., by switching the
unit on for a short moment).
x
Use suitable connecting tubing.
x
Avoid sharp bends in the tubing, and maintain a sufficient distance from
surrounding walls.
x
Make sure that the tubing is securely attached.
x
Regularly check the tubing for material defects (e.g., for cracks).
x
Never operate damaged or leaking units.
x
Always turn off the unit and disconnect the mains cable from the power source
before performing any service or maintenance procedures, or before moving the
unit.
x
Always turn off the unit and disconnect the mains cable from the power source
before cleaning the unit.
x
Always empty the bath before moving the unit.
x
Transport the unit with care.
x
Sudden jolts or drops may cause damage in the interior of the unit.
x
Observe all warning labels.
x
Never remove warning labels.
x
Never operate units with damaged mains power cables.
x
Repairs are to be carried out only by qualified service personnel.
x
Some parts of the bath tank and the pump connections may become extremely
hot during continuous operation. Therefore, exercise particular caution when
touching these parts.
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
