LC4 F
25
To stop the safety temperature alarm:
1. Press the
key to silence the alarm.
2. Determine the cause of the alarm.
Possible causes:
•
The safety temperature setpoint is set lower than the
working temperature setpoint.
•
The working sensor is not connected to the
temperature control medium.
•
An exothermic reaction has caused a rise in
temperature.
3. Press the
key to deactivate the alarm.
The controller resumes operation.
Warning:
The excess temperature protection should be set at least 25 °C below the
fire point of the bath liquid used!
In the event of wrong setting there is a fire hazard!
We disclaim all liability for damage caused by wrong settings!
