Safety notices for your Pearl
9
Switch off the unit at the mains switch and pull
out the power plug
-
before
performing cleaning tasks.
-
before
moving the unit.
Never allow water to penetrate inside the circu-
lator.
The appliance shall not be cleaned with water jet.
Do not immerse the appliance under water.
Never operate a damaged or leaking unit!
Do not attempt to use the unit if the power cord
is damaged! For safety reasons a damaged power
cord may only be replaced by the manufacturer, a
fusionchef
by Julabo
service representative or a
similarly qualified person.
Allow only authorized technicians to perform
service and repair tasks.
Low bath fluid safety float
This unit includes a low bath fluid safety float.
Switching off this safety device (by blocking the
float) can result in a hazardous situation.
Always inspect the low bath fluids safety float
before using the unit. You can check the function-
ality of the float by manually holding down the
unit's float switch with a tool.