Care and maintenance
34
10. Then rinse well with water and dry the parts with
a soft towel. Do not turn the unit upside down.
When drying the unit, hold it in such away that
the water does not run into the interior of the
circulator.
11.
Check the low-level protection float switch
While cleaning the unit, make sure the low-level
protection device is working. To do this, hold the
unit vertically and use your finger to confirm that
the float moves effortlessly.
Notice
The float may not be removed from the float rod.
12.
Dry the unit carefully
to prevent the ingress of
moisture into the interior. After having cleaned
the unit install the particle filter and the protec-
tion grid in reverse order.
Then check the function of the low-level
protection
. Take a thin pin to confirm that the
float moves effortlessly.
