background image

Maintenance 

 

28 

 

be extended. All repairs or replacements performed by Seller pursuant to these 
Warranty Provisions shall be performed at one of the Seller’s facility in 
Allentown, Pennsylvania, U.S.A. or at the facility of an authorized representative 
of Seller, which location shall be determined by Seller in its sole discretion; 
provided, however, that Seller may, in its sole discretion perform such repairs or 
replacements at Buyer’s facility in which case Buyer shall pay Seller’s travel, 
living and related expenses incurred by Seller in performing the repairs or 
replacements at Buyer’s facility. As a condition precedent to Seller’s obligation 
to repair or replace a product part under the Initial Warranty, Buyer shall 
(i)promptly notify Seller in writing of any such defect; (ii) shall have returned the 
product’s record of purchase to Seller or to Seller’s authorized representatives 
within thirty (30) days of the date the product is shipped by the seller; and (iii) 
assist Seller in all respects in its attempts to determine the legitimacy and basis 
of any claims made by or on behalf of Buyer including but not limited to 
providing Seller with access to the product to check operating conditions. If 
Buyer does not provide such written notice to Seller within the Initial Warranty 
period or fails to return the product’s record of purchase as set forth above, 
Seller shall have no further liability or obligation to Buyer therefor. In no event 
shall Seller’s liability under the Initial Warranty exceed the original purchase 
price of the product which is the subject of the alleged defect. 
 
THE REMEDIES PROVIDED IN THE INITIAL WARRANTY ARE THE SOLE AND 
EXCLUSIVE REMEDIES AVAILABLE TO THE BUYER. NOTWITHSTANDING 
ANYTHING TO THE CONTRARY CONTAINED HEREIN, AND EVEN IF THE SOLE 
AND EXCLUSIVE REMEDIES FAIL OF THEIR ESSENTIAL PURPOSE FOR ANY 
REASON WHATSOEVER, IN NO EVENT SHALL SELLER BE LIABLE FOR BUYER’S 
MANUFACTURING COSTS, LOST PROFITS, GOODWILL, OR ANY OTHER SPECIAL, 
INDIRECT, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES TO BUYER 
OR ANY THIRD PARTY AND ALL SUCH DAMAGES ARE HEREBY DISCLAIMED. 
 

Assignment 

Buyer shall not assign any of its rights or obligations hereunder without the 
prior written approval of Seller; provided, however, that if Buyer is a distributor 
of Seller, the rights and obligations of Buyer under these Warranty Provisions 
shall inure to the benefit of and be binding upon Buyer’s customers who provide 
the product’s proof of purchase to Seller pursuant to the terms set forth herein. 
Seller may assign any or all of its rights or obligations hereunder without Buyer’s 
prior consent. 
 

Governing Law 

The Warranty Provisions and all questions relating to their validity, 
interpretation, performance, and enforcement shall be construed in accordance 
with, and shall be governed by, the substantive laws of the Commonwealth of 
Pennsylvania without regard to its principles of conflicts of law.

 

 

Содержание CORIO CP-310F

































Отзывы: