Julabo CORIO CP-310F, Оригинальное руководство по эксплуатации

Страница: 21 / 32

Transport and installation
21
6 Transport and installation
This section describes how to transport the unit safely.
CAUTION
Risk of crushing by falling device!
A device that is not secured appropriately can fall down during improper
transport and cause crushing injuries.
• Secure the device against tipping and falling during transport
• Secure loose parts against falling during transport
• Transport the device upright and with a suitable means of transport
• Wear personal protective equipment
 The device is switched off and emptied.
 A suitable transport trolley is available.
1. Unplug the power plug from the device.
2. Use the recessed grip to lift the device onto the center of the transport
trolley, if necessary in a pair.
 See the technical data for weight information.
3. Use straps to secure the device against tipping in the center of the transport
trolley.
4. Place loose parts for the device, such as cables, on the transport trolley.

The device is then ready for transport and can be safely transported to its
installation location.
6.1 Install the device at the operating location
This section describes how the device is set up at the installation location.
 The device has been transported to the operation location.
 The size and infrastructure of the operation location are suitable for device
operation.
1. If possible, position the device under an extraction system.
 Depending on the bath fluid, gases may be created at high temperatures.
 Recommended minimum distance of 1 m to other devices, to prevent
electromagnetic interference.
2. Place the device on a level, smooth, non-flammable surface.
3. Ensure that the device is securely positioned.
4. For refrigerated circulators: Ensure an open space in front of and behind the
device of at least 20 cm.

The device is set up at the operation location.
i