Julabo BAT7146, Руководство по эксплуатации, Страница: 50 / 172

Abridged Manual - SW22 / SW23
48

Acoustical signals and their differentiation
Three different signals are generated by the sound generator as follows:
an alarm signal, a warning signal and a time signal
The signals can easily be recognized and differentiated, even from a good distance.

))))

The Alarm signal is a continuous sound signal.
Heater and circulator pump (only SW23) are completely and
permanently switched off
.

)
..
)
..

The warning signal is issued at regular intervals
(signal - pause - signal - pause).
The actual bath temperature is higher than the set
overtemperature value or lower than
the set undertemperature
value

))..))
..

The time signal is issued in the intervals
(double signal - pause - double signal - pause).
Countdown of the adjusted operating time commences to zero,
after which a time signal is issued at intervals
Menufunctions
Selecting/exiting the menu level.
•
Simultaneously press the cursor key and enter .
•
Use the cursor keys to select the menu option.
•
Select the alternative state with the edit keys and confirm the selection with
the ENTER key
•
Simultaneously press the cursor key and enter .
Temperature indication in °C or in °F
Futher menu options see operating manual.
ATC - „Absolute Temperature Calibration“
Setup for remote control
Adjusting interface parameters
Circulator pump ON/OFF (only SW23)
Shaking operation ON/OFF
Evaluation of the temperature limits