JUKI PS-800-6045, Инструкция по эксплуатации

Страница: 40 / 65

– 38 –
Classifi
-
cation of
parameters
No. Parameter name
Range
Standard
value
Meaning of parameter and comment
Automatic
machining P172 Intermediate presser is
reset after the completion
of operation Yes/No Yes Intermediate presser motor is reset at
the end of sewing
P248 Whether or not the shaft
travel is required before
setting a reference Yes/No Yes
P252
Clamp opening error at the
time of setting a reference
Yes/No No
P794 Output IO 1 at the end of
operation OUT1 to OUT12
High level / Low
level Low
P796
P795 Output IO 2 at the end of
operation OUT1 to OUT12
High level / Low
level Low
P797
Startup
speed P8 First stitch startup speed (r/
min) 100 to 3000 400 First stitch sewing speed (Adjust this
speed as needed basis)
P9 Second stitch startup
speed (r/min) 100 to 3000 600 Second stitch sewing speed
P10 Third stitch startup speed
(r/min) 100 to 3000 900 Third stitch sewing speed
P11 4th stitch startup speed
(r/min) 100 to 3000 1500 4th stitch sewing speed
P12 5th stitch startup speed
(r/min) 100 to 3000 2100 5th stitch sewing speed
P170 Number of revolutions of
the reverse feed stitching (r/
min) 100 to 3000 1000
Reverse feed stitching speed
P13 Whether or not the soft
start is required Yes/No Yes Whether the machine is started at a
low speed
P162 Whether or not the soft
start is required for the sec-
ond stitch at the beginning
of sewing Yes/No No Whether the second stitch is sewn at a
low speed
Low speed: Indicates that the constant
number has increased. The aforemen-
tioned acceleration setting is disabled.
P163 Whether or not the sewing
speed reduction is required
for two stitches at the end
of sewing Yes/No No Two stitches at the end of sewing are
sewn at a low speed
Speed
parameter P14 Maximum number of revo-
lutions of the main shaft (r/
min) 100 to 4500 3000 Maximum number of revolutions of the
main shaft
This setting defines the maximum
operating speed of rotation on the main
interface of machining.
P15 Jump speed (mm/min) 100 to 100000 35000 Jump speed
Traveling speed of the feeding frame of
the feed unit during the regular stitching
P16 Inching speed of the feed
(mm/min) 100 to 20000 5000 Traveling speed employed during read-
ing, correcting and creating a pattern
P160 Trial stitching speed (mm/
min) 100 to 60000 8000 Demonstration speed
P17 Button sewing speed 1
after the button is pressed
(mm/min)
100 to 20000 500 Eight direction keys support the case of
manual movement of the box or collec-
tion of files
Operation speed using icon