JUKI PS-800-6045, Инструкция по эксплуатации

Страница: 43 / 65

– 41 –
Classifi
-
cation of
parameters
No. Parameter name
Range
Standard
value
Meaning of parameter and comment
Statistics
settings P47 Operation continues after
the counter has reached
the set value Yes/No v Whether the operation is continued
after the sewing counter has reached
the set value
P48
Counter setting is enabled
Yes/No No Whether the sewing counter is enabled
P52 Working hours counter Yes/No No In the case of "Yes", the machining time
statistics function is enabled
P779 Bobbin thread count mode IN1 to IN4 /
default Default Statics mode of the bobbin thread
amount
P780 Adjustment value of the
surplus amount of bobbin
thread (mm) 0 to 600000 0 Adjustment of the bobbin thread re-
maining amount
Thread
clamp
setting P54 Thread clamp position at
the beginning of sewing 0 to 200 0 Thread clamp position at the beginning
of sewing
P236 Laser output IO Out 1 to OUT12
/No No Laser output
Detection
of thread
breakage P55 Automatic detection of
thread breakage Yes/No No In the case of "Yes", the operation is
stopped and the description of error is
displayed.
Thread breakage detection function
P57 Detection is ignored for
the set number of stitches
during sewing 1 to 255 5
For the number of stitches firstly set,
thread breakage will not be detected
P58
Detection of the effective
number of stitches in the
case of thread breakage
1 to 255 15 In the case thread breakage is detect-
ed continuously to reach the specified
maximum number of broken stitches,
it is assumed that thread has broken
definitely.
P237 Thread breakage output IO Out 1 to OUT12
/No
No
Thread
breakage
setting P60 The number of revolutions
of the thread trimmer main
shaft (r/min) 10 to 500 180 Thread trimmer main shaft speed
P61 Delay in the start of thread
trimmer (s) 0.01 to 6.55 0.01 Delay time at the start of thread trim-
ming
P62
Continuous operating time
of the wiper (s)
0.01 to 6.55 0.15 Wiper operating time
P63 Delay in the lifting of press-
er foot after turning OFF
the wiper (s) 0.01 to 6.55 0.25 Wiper OFF delay time
P65 Whether or not the thread
is trimmed during jump
after sewing Yes/No Yes Whether thread is trimmed at the time
of jump
P66 Whether or not the wiper is
used Yes/No Yes Whether the wiper is used
P169 Thread slackening start
mode Angle / delay Angle Starting timing method for turning OFF
the thread tension release mechanism
P168 Thread slackening angle 0 to 999 730 Thread tension release mechanism
turning-OFF angle
Energi-
zation
setting P70 The sewing machine is re-
turned to the "stop with its
needle up" state at the time
of turning the power ON Yes/No No Needle bar is at upper position when
turning the power ON
P71
Clamp is automatically
returned to its origin at the
time of turning the power
ON
Yes/No No
Cassette automatically returns to its
origin when turning the power ON