JUKI PS-800-6045, Инструкция по эксплуатации

Страница: 39 / 65

– 37 –
4-22. List of parameters
Classifi
-
cation of
parameters
No. Parameter name
Range
Standard
value
Meaning of parameter and comment
Automatic
machining P1
Clamp is opened after the
completion of automatic
machining
Yes/No Yes
Cassette clamp is lifted every time the
continuous sewing cycle is completed
P2 Number of stitches to be
sewn at the beginning and
end of sewing with the in-
termediate presser lowered 0 to 8 2 Number of stitches during which the
intermediate presser presses the mate-
rial at the beginning and end of sewing
P3 Thread trimming after the
completion of automatic
machining
Yes/No Yes Thread trimming is carried out every
time the continuous sewing cycle is
completed.
P4 Position to which the
needle is returned after the
completion of automatic
machining Origin / second-
ary origin Second-
ary origin "Origin" is the origin of absolute coordi-
nates.
"Secondary origin" is the secondary ori-
gin (offset point) added to the pattern.
P5 Whether or not the thread
tension is required to be
lowered Yes/No Yes Whether or not the tension on the
thread is loosened during jump
P173
Clamp foot is retained
when setting a reference
Yes/No No The clamp foot is retained while a refer-
ence is being set.
On the "Main screen", keep the clamp
foot held at its current position while
moving the shaft. (Lifted or lowered)
The "Main screen" is displayed after
the operation panel is started up.
P259 Automatic operation of the
clamp Yes/No Yes Whether the cassette clamp is turned
ON at the beginning of sewing
P240
Clamp operation in prior to
the manual feed
Yes/No No Whether the cassette clamp is turned
ON before the manual feed is carried
out
P6 Number of stitches to be
sewn with overlapped at
the beginning of sewing OFF / 1 / 2 OFF In the case of set value "1" or "2", sew-
ing is carried out once or twice in rep-
etition at the first needle entry position
before proceeding to the next needle
entry position at the time of starting the
sewing machine.
Setting of the number of reverse feed
stitches at the beginning of sewing
In the case of "OFF", the sewing ma-
chine does not repeat sewing
P7 Number of stitches to be
sewn at the beginning of
sewing without the thread
tension release mechanism 0 to 255 0 The thread tension release mechanism
is turned OFF while the sewing ma-
chine sews the set number of stitches
at the beginning of sewing
P147 Height of the intermediate
presser when it is lowered
at the beginning of sewing 0 to 4 0.5 Intermediate presser height at the be-
ginning of sewing
P148 Height of the intermediate
presser when it is lowered
at the end of sewing 0 to 4 0 Intermediate presser height at the end
of sewing
P161 Setting of the oscillating
width of the presser foot at
the beginning and end of
sewing Normal / half
cut / increase Normal