JUKI PS-800-6045, Инструкция по эксплуатации

Страница: 3 / 65

– 1 –
1. SPECIFICATIONS
1 Sewing area (X,Y)(mm) 600 × 450
2 Feed motion of feeding frame Intermittent feed (2-shaft drive by stepping motor)
3 Needle bar stroke 39.5 mm
4 Max. sewing speed 3,000 sti/min (When stitching pitch is 2.2 mm or less)
For other stitch pitches and numbers of revolutions, refer to Fig. 1.
5 Settable stitch length 0.5 to 12.7 mm
6 Needle DB × 1 #8 (#7 to #14)
7 Hook Double-capacity full-rotary hook
8 Intermediate presser stroke 4 mm (Standard)
9 Lift of intermediate presser 20 mm
10 Lift of disc presser 15 mm
11 Memory of pattern data Max. 999 patterns
12
Number of patterns that can be identified
Max. 999 patterns
13 Program input method USB
14 Data format DXF.AI.PLT.DST
15 Main shaft servomotor power 550W
16 Power consumption 500VA
17 Input voltage 220V ± 10%
18 Mass (gross mass) Standard type : 320 kg
19 Dimensions 1,200 mm (W) × 1,570 mm (L) × 1,624 mm (H)
20 Operating temperature range
5 to 35 ˚C
21 Operating humidity range 35 to 85 % (No dew condensation)
22 Storage temperature range
-5 to 60 ˚C
23 Storage humidity range 10 to 85 % (No dew condensation, 85 % applies to the case where the tem-
perature is 40 ˚C or lower)
24 Air pressure used 0.5 to 0.6 MPa
25 Needle highest position stop facility After the completion of sewing, the needle can be brought up to its highest
position.
26 Noise
- Equivalent continuous emission sound pressure level (L
pA
) at the worksta-
tion :
A-weighted value of 78.0 dB ; (Includes K
pA
= 2.5 dB) ; according to ISO
10821- C.6.2 -ISO 11204 GR2 at 2,800 sti/min.
27 Lubricating oil
#10 (Equivalent to JUKI NEW DEFRIX OIL No. 1)
#32 (Equivalent to JUKI NEW DEFRIX OIL No. 2), Lithium based grease No. 2
Grease information
Manufacturer: WERATCHE
Type and number: Lithium base 2# grease
Stitch pitch and the sewing speed
Number Stitch pitch Sewing speed
Remarks
1 2.8 mm 2,800 sti/min
2 3.0 mm 2,500 sti/min
3 4.0 mm 2,200 sti/min
4 5.0 mm 1,800 sti/min
Note: The sewing machine must not run at the maximum num-
ber of revolutions continuously for more than 15 minutes. The
number of revolutions may vary even if the pitch is consistent
due to the change in the needle and material.
Fig. 1