JUKI PLN-985, Инструкция по эксплуатации

Страница: 8 / 24

vi
• Before you put the machine into operation for the first time after the set-up, clean it thoroughly .
remove all dust gathering during transportation and oil it well.
• Confirm that voltage has been correctly set.
Confirm that the power plug has been properly connected to the power supply.
• Never use the machine in the state where the voltage type is different from the designated one.
• The direction of normal rotation of the machine is counterclockwise as observed from the pul -
ley side.
Take care not to allow the machine to rotate in the reverse direction.
• When tilting the machine head, tilt it after removing knee lifter hook.
• Never operate the machine before lubricating.
• For a test run, remove the bobbin and the needle thread.
• For the first month, decrease the sewing speed and run the sewing machine at a speed of 1,500
sti/min or less.
• operate the handwheel after the machine has totally stopped.
cautIoN :
Check the following so as to prevent maloperation of and damage to the machine.
BEForE oPEratIoN
– 7 –
.14.. ADJUSTING.THE.PRESSER.FOOT.PRESSURE
.15.. THE.HEIGHT.OF.THE.FEED.DOG
.16.. THE.NEEDLE-TO-HOOK.BLADE.POINT.RELATIONSHIP
WARNING.:
To.avoid.possible.personal.injury.due.to.abrupt.start.of.the.machine,.turn.off.the.power.to.the.machine.and.check.to.be.sure.that.
the.motor.has.totally.stopped.rotating.in.prior.
WARNING.:
To.avoid.possible.personal.injury.due.to.abrupt.start.of.the.machine,.turn.off.the.power.to.the.machine.and.check.to.be.sure.that.
the.motor.has.totally.stopped.rotating.in.prior.