JUKI PLN-985, Инструкция по эксплуатации

Страница: 13 / 24

– 2 –
5) Attaching the hinge arm
Install hinge arms
4
to the front and rear (at one location each) of
the sewing machine head with screws
5
. Hook hinge seats
6
on
hinge arms
4
.
(When hooking hinge seats
6
on the hinge arms
4
, face the counter
sunk plane of the hinge seats
6
upward.
6
5
4
6) Installation of the machine
Put the sewing machine head on the table with the sewing machine
head and hinge seats
6
aligned.
Fix hinge seats
6
with wood screws
7
supplied with the unit.
7
. 2.. INSTALLING.THE.THREAD.STAND
Assemble the thread stand, set it up on the machine table using the
installation hole in the table and tighten nut
1
gently.
1
– 3 –
. 3.. LUBRICATION
WARNING.:
To.avoid.possible.personal.injury.due.to.abrupt.start.of.the.machine,.turn.off.the.power.to.the.machine.and.check.to.be.sure.that.
the.motor.has.totally.stopped.rotating.in.prior.
. 4.. INSTALLING.THE.BELT.COVER.AND.THE.BOBBIN.WINDER
WARNING.:
To.avoid.possible.personal.injury.due.to.abrupt.start.of.the.machine,.turn.off.the.power.to.the.machine.and.check.to.be.sure.that.
the.motor.has.totally.stopped.rotating.in.prior.