manualshive.com logo in svg

JUKI HZL-600, Инструкция по эксплуатации, Страница: 10 / 108

Поделиться
Скачать
JUKI HZL-600 Скачать руководство пользователя страница 10

8

Connecting to the power supply 

    Connecting to the 

    power supply

Warning

 • Disconnect the plug and turn off the power

   switch (turn to “O”)  that always sewing machine

   is not to use. 

    In case Start/stop button is used:

Power switch

Plug 

Machine-socket-inlet

Operating power switch:

Turn OFF the machine, set the power switch to "0"

Turn ON the machine, set the power switch to "I"

OFF

ON

        WARNING (For U.S.A.,Canada only)

This  appliance  has  a 

polarized

  plug  (one 

blade

 

wider

  than  the 

other). To 

reduce

 the risk 

of

 electric shock, this plug is 

intended 

to 

fit

 in a 

polarized

 outlet only one way. 

If

 the plug 

does

 not 

fit

 

fully 

in  the  outlet,  reverse  the  plug. 

If

  it  still 

does

  not 

fit,

  contact  a 

qualified

 electrician to install the proper outlet. 

Do

 not 

modify

 the 

plug in any way.

1. Turn OFF the power switch (turn to “O”)

2. Insert cord-connector into machine-socket-inlet.

3. Insert plug into socket-outlet.

4. Turn ON the power switch. (Turn to “I”)

Содержание HZL-600













































































































Отзывы:

Нет отзывов