JUKI HZL-600 страница 11 Скачать руководство пользователя

Страница: 11 / 108

Connecting to the power supply

Connecting to the

power supply

Warning

• Disconnect the plug and turn off the power

switch (turn to “O”) that always sewing machine

is not to use.

In case Start/stop button is used:

Power switch

Plug

Machine-socket-inlet

Operating power switch:

Turn OFF the machine, set the power switch to "0"

Turn ON the machine, set the power switch to "I"

OFF

WARNING (For U.S.A.,Canada only)

This appliance has a

polarized

plug (one

blade

wider

than the

other). To

reduce

the risk

electric shock, this plug is

intended

fit

in a

polarized

outlet only one way.

the plug

does

not

fit

fully

in the outlet, reverse the plug.

it still

does

not

fit,

contact a

qualified

electrician to install the proper outlet.

not

modify

the

plug in any way.

1. Turn OFF the power switch (turn to “O”)

2. Insert cord-connector into machine-socket-inlet.

3. Insert plug into socket-outlet.

4. Turn ON the power switch. (Turn to “I”)

Using the foot-controller:

Power switch

Plug

Foot controller

Foot-controller-plug

Foot-controller-jack

1. Turn OFF the power switch (turn to “O”)

2. Insert the foot-controller-plug into the foot-controller-jack.

3. Insert cord-connector into machine-socket-inlet.

4. Insert plug into socket-outlet.

5. Turn ON the power switch. (Turn to “I”)

* When the foot controller is plugged in, the start/stop button

cannot be used to start sewing.

Start button: Can not operate to start sewing.

Stop button: Can operate to stop sewing.

Содержание HZL-600













































































































Результаты поиска

Содержание HZL-600

Отзывы:

Похожие инструкции для HZL-600

Бренды по названию

Популярные бренды

JUKI HZL-600, Инструкция по эксплуатации

Результаты поиска

Содержание HZL-600

Отзывы:

Похожие инструкции для HZL-600

Бренды по названию

Популярные бренды