JUKI DLU-5494N-7/IP-100C, Руководство по установке

Страница: 5 / 9

– 3 – – 3 – – 3 –
ENGLISH
There are cases where the software in the state of delivery may be unadaptable. Perform checking and updating
of the software following the procedure below.
Turn ON the power, and press switch
1
for three seconds.
■ Normal screen
The screen is changed over to the screen below. Then press switch
2
to open the RVL check screen.
■ Information maintenance level screen
■ RVL check screen
・
When the version of is not displayed, there is a possibility that either of the software may be unadaptable.
Check the versions of the aforementioned software.
3. SETUP OF THE SOFTWARE
(1) Checking procedure of the software version
1
<Information switch>
2
Cau tion
Be sure to start from the software of IP-100 when performing the version-up of the software.