JUKI DLU-5494N-7/IP-100C, Руководство по установке

Страница: 8 / 9

– 6 –
■
Writing finish screen IP-100
When the screen has changed to the aforementioned screen, writing is finished. Turn OFF the power. When
rewriting the software of main shaft, start from "3. (2) 1) Common procedure" .
■ Data classification selection pop-up
3) Rewriting procedure of the software of main shaft
When the screen has changed to the aforementioned program selection screen, press switch
1
and repeat the
selection operation until the programs of "IP-100-SC" and "01-02-0100" are selected. When the programs are
displayed from the beginning, it is not necessary to perform the selection operation.
When the preparation is ready, press switch
2
to start writing.
■ During writing screen IP-100
The aforementioned screen is the during writing screen. During displaying the during writing screen, do not turn
OFF the power. When the power is turned OFF during writing, the operation cannot be guaranteed.
■ Program selection screen IP-100
1
2
2 1