Linear
Makes the
data for the
sewing
the
the
direction.
045
Makes the sewing data
the
sewing making the double-stitch
the
0 4 6
Makes the sewing data for the arc
making the double-stitch
in the reverse
047
Makes the sewing
for the
sewing
the double-stitch
the reverse direction.
050
L i n e a r R e v
Makes the
data for the linear sewing making sewing two times
the reverse direction.
0 5 1
Rev
Makes the sewing data for the
sewing making sewing two times
I .
the
direction.
0 5 2
Makes the sewing data for the arc sewing
sewing two times in
the reverse direction.
053
Circle Rev
Makes the sewing data for the circle sewing mating sewing two times
in the reverse direction.
060
Jump Spd
Sets the speed of the jump data input.
0 6 1
Chg Pt-Sp
Sets the sewing speed in the section designated in the sewing data
I
062
S-Len Change
Changes the sewing pitch.
063
E l e m e n t
Can delete the input data by the unit of element.
B a c k - T u c k
the back-tuck data.
065
Condensation
Creates the condensation stitching data.
Over Stitch
Can input the point sewing using the [Forward] or [Backward] key.
070
Del
Deletes the sewing point. and the data
the deleted sewing point
will
0 7 1
Pt Move
Moves the sewing points. and the data after the sewing point has been
L-Apex Del
moved will move.
072
Deletes the top point of the linear, and the data
the deleted top
point will
073
L-Apex
Moves the top point
the linear. and the data
the top point has
been moved will
074
Deletes the sewing point, and
data after the sewing point will
075
Pt Move A
Moves the sewing point, and the data
the sewing point will
076
Pt Add A
Adds the sewing point.
data after the sewing point will not move.
077
L-Apex Del A
Deletes the top point of the
and the data after the top point
been deleted will not move.
078
L-Apex Mov A
Moves the top
of the linear, and the data
the top point
not
080
Patt Read
Pattern
stored on the floppy disk can be read out from it.
0 8 1
Pat! write
Can write
sewing pattern onto the floppy disk.
082
X S y m m e t r y
Adds the shape that the needle position is symmetrical to the x-axis.
Symmetry
Adds the shape
the needle position is symmetrical to
y-axis.
P t
Adds the
that the center of needle position is symmetrical to tht
5 0